|
Die Name ,Model and
Size |
Typical
Application |
Design
Schematic |
Die
Features |
|
Flange Die FD 1/2" to 6"
|
Solid Shapes without enclosed
sections. |
 |
Available for all
extruders (bolt or clamp type).
Available With Die nut for sizes
up to 3" Dia.
Available with quick-change die plate
all sizes.
Available with or without replaceable die. |
|
Multi Durometer Die
MDD 3/8" to 20" (See Note 5) |
Solid Shapes without enclosed
sections. |
 |
Available up to 4
durometer sections.
Available for rubber
and thermoplastic.
Each MDD is custom
designed.
Larger sizes available as special.
Available with
air/vacuum attachment. |
|
Spider Die
SD 1/2" to 20" (See Note 5) |
Solid Shapes and shapes
having closed sections
. |
 |
Available with die centering.
Available
with air/vacuum attachment.
Available with
striping option.
Available with skin coat
options.
Available
with die/bushing heat(large sizes Only). |
|
In-Line Spiral Die HPI 3/4" to 8.5"
(See Note
5) |
Solid shapes and shapes
having closed sections.
Products needing
minimal weld/stress lines. |
 |
Minimum
weld/stress lines and stripe/skin coat.
Available with quick-change
design for tools.
Available with heated pin and flow mandrel (larger
sizes only).
Available with die/bushing
centering.
Available with die/bushing heat. |
|
Flat Hose Die FHD 1/2" to 6"(See Notes 5) |
Collapsible hoses with
reinforcing sock:
- Fire Hoses
- Garden
Hoses
|
 |
Available in designs for hoses using same
polymer inside and outside OR different polymers for inside and outside
with or without reinforcing sock.
Complete sysytem available
for handling the reinforcing sock. |
|
Multi-Layer Reinforced Hose
MRH
1/2" to 4" |
Multi-layer hose with
reinforcing:
- Bilge/Drain
- Potable
|
 |
Tandem setup and available in
two, three and four layers.
Die
Centering available.
Available in spider, multi-channel and spiral
flow designs.
Available with Air/Vaccum
attachment.
|
|
Tri-Die
TD
1/2" to 12"
(See Note
5) |
Co-extrusion of up to
three layers. |
 |
Designed for
demanding three layer co-extruded products.
Die Centering from from front.
Available for single, two layer,
three layer
and multi-stripe versions.
Gum
space adjustmentavailable in single and two layer
version.
Air and Vacuum attachment available. |
|
Rotating Die Head
RH
1" to
3" |
Tubes requiring
internal or external spiral features.
Solid rounds requiring
external spiral features. |
 |
Available
with tip/pin rotation (internal spirals).
Available with die/bushing
rotation(external spirals).
Available with rpm coordinated
with line speed.
Available with or without the
drive subsystem.
|
|
DISC Die Head
DH
1/4" to
1-1/2" |
Multi-layer, co-extruded
products using ploymers of different melt temperature. |
 |
Available in up to five layers.
Can handle dissimilar stock
temp compounds.
Conial
spiral flow design.
Reduces weld/stress lines and improves
burst strength.
Easy to change compounds to different layers.
Micro center adjustment. |
|
Multi-Strand Die
MSD
Up to
.312" |
Coating Wires.
Coating yarns.
Coating Fiber.
Single or two
Colors. |
 |
Available in
four, six and eight strands.
Available in single color
or two
Two colors can be
in any proportion.
Available in fixed center and adjustable versions.
Flow to any strand can be
independently controlled up to shutoff. |
|
Two
Temp,Two Layer Die
2T2L
1/4" to
3" |
Dual layer,
co-extrusion requiring high temperature differential. |
 |
Die Centering from the front.
Tip/bushing/ID heat
control available.
Flow sepration
design.
Quick change die design
available. |
